Common transmission of T and D numbers for tool requests (P-STUP-00029)
P-STUP-00029 | Common transmission of T and D numbers for tool requests sent to an external tool management system. |
Description | This parameter changes the protocol of tool requests between the CNC and an external tool management system. When the parameter is active, the programmed D number is sent together with the programmed T number. The D number is then placed in the variant field of the request and the T number is in the basic field. When the parameter is inactive, two separate requests are sent to the external tool management system. |
Parameter | common_t_d_request |
Data type | BOOLEAN |
Data range | 0: Transmit T and D numbers in separate requests. 1: Transmit T and D numbers together actively. |
Dimension | --- |
Default value | 0 |
Remarks | Parameter available as of V3.1.3080.13 and V3.1.3107.46 When P-STUP-00029 is active, the parameter P-CHAN-00016 (ext_wzv_vorhanden) must be active in every channel. If this is not the case, the warning ID 22243 is output and the channel parameter P-CHAN-00016 is set to active.
P-STUP-00029 does not change the operation mode of the NC commands #TOOL DATA, #TOOL PREP and #TOOL LIFE READ. P-STUP-00029 may not be used with an old external tool management system. The interface must be at least version no. 1.0.0. Otherwise, error ID 22247 is output. The value of the parameter is specified at initial handshake via the interface version of the external tool management system. |