Special settings for spindles
Notice
The parameters described in this section are required for axes of axis type 'ACHSTYP_SPINDEL' interpolated by a spindle interpolator.
Additional information
- Restriction of direction of rotation (P-AXIS-00224)
- Definition of preferred direction of spindle rotation (P-AXIS-00031)
- Speed-value attained - tolerance band (P-AXIS-00217)
- Limiting velocity for the measurement system (P-AXIS-00220)
- Limit for spindle speed 'zero' (P-AXIS-00216)
- Reverse of sign for setpoint and actual value (P-AXIS-00159)
- Switch to velocity controlled mode (P-AXIS-00265)
- Switch back to position control (P-AXIS-00266)
- Use actual velocity for revolution monitoring (P-AXIS-00519)
- Output time M19 for positioning the spindle (P-AXIS-00523)
- Checking commanded spindle speed versus permissible tool speed limits (P-AXIS-00474)
- Weighting of velocity feedforward control (P-AXIS-00766)
- Velocity limit for switching to velocity controlled mode (P-AXIS-00767)
- Velocity limit for switching back to position control (P-AXIS-00768)
- Delay time for error message suppression with spindle tool revolution monitoring (P-AXIS-00787)
- Limit velocity for delay with spindle tool revolution monitoring (P-AXIS-00788)