Settings for homing
Additional information
- Preferred direction of axis for homing (P-AXIS-00158)
- Homing without cam (P-AXIS-00156)
- Homing without reverting (P-AXIS-00157)
- Position of the reference point (P-AXIS-00152)
- Fast velocity for detection of reference cam (P-AXIS-00219)
- Slow velocity for exact detection of reference position (P-AXIS-00218)
- Homing only with cam (without zero pulse) (P-AXIS-00084)
- Slow / fast movement down from cam (P-AXIS-00064)
- Maximum velocity for unreferenced axes (P-AXIS-00268)
- Lock moving of unreferenced axes (P-AXIS-00277)
- Modes for setting the homing position (P-AXIS-00278)
- Offset to the homing position (P-AXIS-00279)
- Homing method ‘evaluation of encoder overflow’
- Acceleration during homing (P-AXIS-00285)
- Ramp time during homing (P-AXIS-00286)
- Homing type (P-AXIS-00299)
- Gantry monitoring during drive-controlled homing (P-AXIS-00298)
- Input interface for reference cam signal (P-AXIS-00321)
- Use of hardware limit switch as reference switch (P-AXIS-00329)
- Maximum distance for zero pulse search (P-AXIS-00404)
- Delayed activation of zero pulse logic (P-AXIS-00494)
- Maximum distance during homing (P-AXIS-00412)
- Maximum distance when moving from reference cam (P-AXIS-00531)
- Homing to fixed stop
- Reference monitoring (antr.reference_check.*)
- Axis remains referenced after resolution change (P-AXIS-00538)
- Transfer reference position for drive-controlled homing to the drive (P-AXIS-00584)
- Allow drive-controlled homing without controller enable (P-AXIS-00803)
- Referencing to limit switch with tracking (P-AXIS-00814)