Description of elements
Additional information
- Configuration of the NC channel.
- Configuration of PLC functions
- Dimensional units and resolutions
- Settings for tool management
- Settings for edge banding
- Settings for measurement
- Global program effectiveness of P parameters (P-CHAN-00067)
- Single-step operating mode (P-CHAN-00015)
- Settings for diameter programming (P-CHAN-00091)
- Settings for circle centre point correction and radius compensation
- Settings for RESET
- Retention of the last axis configuration (P-CHAN-00460)
- Maximum channel override (P-CHAN-00056)
- Sampling of override (P-CHAN-00065)
- Mode of the override
- Operating principle of PLC feed (P-CHAN-00102)
- Settings for vector dynamic limits (vector.*)
- Configuration of effector coordinate system (ECS)
- Tracking a rotary axis
- Switch the default feed axis (P-CHAN-00096)
- Valid deceleration ramp at FEEDHOLD (P-CHAN-00097)
- Switch over the meaning of M functions (P-CHAN-00098)
- Effectiveness of tool compensation data (P-CHAN-00100)
- Configuration of path axes
- Configuration of spindles
- Settings for synchronous mode (synchro_data.*)
- Parameterisation of the change logging function (aep.*)
- Definition of macros (makro_def[i].*)
- Settings for tool radius compensation (TRC)
- Configuration of syntax check (syn_chk.*)
- Parameterisation of kinematic transformations
- Default settings at program start (prog_start.*)
- Reduction of tangential transition velocity (P-CHAN-00009)
- Including jerk in the polynomial (P-CHAN-00110)
- Jerk limiting mode at block transition (P-CHAN-00117)
- Additional consideration of curvature at block transition (P-CHAN-00245)
- Look ahead speed limit (speed_limit_look_ahead.*)
- Settings for manual mode
- Exclusivity of measuring system programming (P-CHAN-00116)
- Exclusivity of axes programming (P-CHAN-00148)
- Subroutine call with M6 (P-CHAN-00118)
- Subroutine call with D word (P-CHAN-00429)
- Subroutine call at program start / MDI
- Subroutine call at program end / MDI
- Settings for software limit switch (SLS) monitoring
- List interpretation with active NC program (P-CHAN-00146)
- Adoption of block number when subroutine is called (P-CHAN-00150)
- Parameterisation of HSC machining (hsc.*)
- Channel synchronisation on axis exchange (P-CHAN-00154)
- Channel initialisation with actual values (P-CHAN-00455)
- Program name for automatic streaming (P-CHAN-00158)
- Modal effect of I/J/K for circle programming (P-CHAN-00159)
- Subroutine calls using G functions
- Active testing whether axis group is 'in position' (P-CHAN-00173)
- Ignore internal stop conditions with rapid contour visualisation (P-CHAN-00183)
- Behaviour with axis errors (P-CHAN-00218)
- Path-dependent dynamic weighting
- Radius-dependent dynamic weighting
- Special manual mode data (man_mode.*)
- Cycle programming settings
- Settings for edge machining (edge_machining.*)
- Decoder block ahead limiting
- Exact stop with rapid traverse (P-CHAN-00235)
- Check exact stop with additive movements (P-CHAN-00486)
- Settings for lifting
- Settings for robotics
- Limiting the path length of motion block (P-CHAN-00457)
- Handling of polynomial blocks of zero length (P-CHAN-00254)
- Settings for profile tube processing (tube_profile.*)
- Optimised polynomial smoothing (P-CHAN-00259)
- Configuration of interpolator input disable (P-CHAN-00267)
- Settings for forward/backward movement on the path (forward_backward.*)
- User-defined data (customer.*)
- Encryption of NC programs (P-CHAN-00283)
- Settings for independent axes
- Jog of path option after block search (P-CHAN-00305)
- Checking the license in the clone channel (P-CHAN-00306)
- Positioning of modulo axes on shortest path (P-CHAN-00346)
- Optimised insertion of #FLUSH CONTINUE (P-CHAN-00341)
- Enable 2-path programming (P-CHAN-00261)
- Configuration of general display data
- Logging of manual block commands
- Filter parameters for error handling in the NC channel (error_filter[i].*)
- Settings for programming coordinate systems (coordinate_system.*)
- Response of G91 with orientation axes (P-CHAN-00332)
- Use of axis numbers of master channel (P-CHAN-00282)
- Buffering motion blocks to optimise the feed rate profile (P-CHAN-00329)
- Units used in PLC Open functions (P-CHAN-00182)
- Starting NC programs without initialisation (P-CHAN-00347)
- Logical number of a NC channel (P-CHAN-00400)
- Settings for throughfeed machining (conveyor_sync.*)
- Settings for dynamic contour control (dcc.*)
- Settings for surface feed rate (geo_feed_adapt.*)
- NC program paths (path[i].*)
- Settings for generating debug data (debug.*)
- Configuration of channel interface (provide_channel_interface.*)
- Settings for 'Time preview' function
- Merge short blocks for optimised contouring (P-CHAN-00321)
- Contouring method in inch units (P-CHAN-00439)
- Unit of constant cutting velocity (P-CHAN-00360)
- Synchronisation of PLCopen jobs (P-CHAN-00359)
- Orientation interpolation mode (P-CHAN-00417)
- Orientation motion with active machining coordinate system (P-CHAN-00858)
- Axis-specific orientation of tool length compensation (P-CHAN-00420)
- Deactivate feed factor effect (P-CHAN-00422)
- Residual time calculation up to trigger mark, residual time look-ahead
- Settings for precalculation
- Dynamic look-ahead for axis polynomials (P-CHAN-00453)
- Memory size for contour machining (P-CHAN-00467)
- Real-time cycles
- Compatibility for measuring with #CS/Transformation (P-CHAN-00440)
- Calculation mode of resulting ramp time with #CS and #TRAFO (P-CHAN-00758)
- Tolerance limit for recalculation with dynamic limitation of axis positions (P-CHAN-00751)
- Settings for thread tapping
- Settings for thread cutting
- Parameter for MultiCore
- 3D distance control (dist_ctrl[i].*)
- Definition - Load model (limit.kin[i].dynamic_model.load[j].*)
- Dynamic model
- Suppressing escape motions (P-CHAN-00430)
- Discontinued parameters