Reduction of tangential transition velocity (P-CHAN-00009)
P-CHAN-00009 | Reduction of tangential transition velocity between circles |
Description | Tangential block transitions between circles with different radii and circles and linear blocks and vice versa lead to a jerk depending on circle radius. A jerk produced by activating this function can be reduced in order to reduce the excitation of vibrations on the machine when non-linear velocity profiles are active. At tangential block transitions, the speed is reduced dependent on the permissible jerk. The calculation is based on axis-specific jerk parameters for non-linear speed profiles (see also [AXIS] documentation). On the other hand, the reduction of speed at tangential block transitions is not acceptable with specific machining technologies since the machining process has a very sensitive reaction to a reduction in velocity. |
Parameter | corr_v_trans_jerk |
Data type | BOOLEAN |
Data range | 0: No inclusion of jerk at tangential block transitions. 1: Inclusion of jerk at tangential block transitions. |
Dimension | ---- |
Default value | 0 |
Remarks |
|