Drive probing input for PROBE0/1 Keyword (P-AXIS-00583)
P-AXIS-00583 | Number of the drive-specific probing input assigned to the keyword PROBE0 or PROBE1 in the command #MEAS[INPUT=..]. | ||
Description | This parameter defines which drive probing input is assigned to the keywords INPUT=PROBE0 and INPUT=PROBE1 in the command #MEAS. Assign parameters to the keywords as follows: | ||
Keyword | Parameter | ||
'PROBE0' | kenngr.measure.probe[0].input | ||
'PROBE1' | kenngr.measure.probe[1].input | ||
Example: When kenngr.measure.probe[0].input has the value 1, probing input 1 of the drive is used by the NC command #MEAS [AX=X INPUT=PROBE0] on receipt of the next probing command on the X axis. The permissible value range depends on the drive type. If the parameterised value is invalid, the error message ERR-110622 is output and the value is corrected. If no value is parameterised for this parameter, the following default values are used: | |||
Parameter | Default value | ||
kenngr.measure.probe[0].input | |||
kenngr.measure.probe[1].input | P-AXIS-00539 | ||
Parameter | kenngr.measure.probe[i].input | ||
Data type | SGN16 | ||
Data range | ---- | ||
Axis types | T, R | ||
Dimension | T: ---- | R,S: ---- | |
Default value | 0 | ||
drive types. | Simulation, Conventional, SERCOS, Terminal, Lightbus, Profidrive, CANopen | ||
Remarks | This parameter is available as of V2.11.2808.00 and higher. | ||