ID 13104

Infeed depth exceeds permissible machining stroke.

Description

The maximum permissible machining stroke can be entered in the tool parameters (P[1], see section: Cycle-specific tool data). If a value is unequal to 0, a check is made as to whether the calculated infeed depth is less than the maximum permissible machining stroke. If not, the message is generated.

Response

Class

-

Warning: The number of infeeds or the value of one machining stroke is adjusted internally in the cycle based on the maximum stroke and the cycle is continued.

Solution

Class

-

Accordingly, increase the number of infeeds in the input parameters or check whether the permissible machining stroke is correctly defined. If necessary, use a different tool for machining with a machining stroke that is adequate for the infeed depth.

Error type

1, Error message from the NC program