ID 20943

Wrong or missing gear range.

Description

In the channel parameters, spindle gear change is activated (P-CHAN-00052).

The spindle speed was programmed in the NC block without a gear stage (M40-M45). So this spindle speed does not match to the currently active gear stage and also the automatic gear stage determination is disabled.

Response

Class

2

Abort NC program processing.

Solution

Class

3

The following remedial actions are possible:

  • the programmed spindle speed must match the gear stage already active, or
  • the automatic gear stage determination P-CHAN-00004 must be activated in the channel parameter list, or
  • the corresponding gear stage (P-CHAN-00058, P-CHAN-00055) must be programmed for the spindle speed.

Parameter

%1:

Current value [-]

Programmed spindle speed

Error type

1, Error message from NC program.