ID 21192

Channel parameters: Axis specific use of internal M-function not allowed.

Description

An internal M function is used in an axis-specific context. The M function is either preset axis-specific in the channel parameters (P-CHAN-00039) or programmed in the NC program in an axis-specific command sequence [PROG].

In the NC-control internal M-functions have a firm meaning and are not freely available.

This also includes: M0, M1, M2, M3, M4, M5, M17, M19, M29, M30, M40 – M45

Exception:

M0 and M1 may also be used axis specifically.

Dependent on P-CHAN-00098, also M3, M4, M5 and M19 can be used for specific axis.

Response

Class

2

Either the start-up of the control is continued and the wrong setting is removed or the NC program is aborted.

Solution

Class

3

Check and modify the settings of the channel parameters

(P-CHAN-00039) or remove the M function from the axis-specific command sequence in the NC program.

Parameter

%1:

Error value[-]

Error type

1, Error message from NC program.