ID 21408

#GET WCS POSLIMIT not allowed during active synchronous operation.

Description

During active synchronous operation (#ENABLE AX LINK or #AX LINK ON) the command #GET WCS POSLIMIT is programmed in the NC program. This is not permitted.

Example:

Wrong:

N10   G00 X0 Y0 Z0

N30   #SET AX LINK[1, B=X]

N40   #ENABLE AX LINK[1]

:

N100  #GET WCS POSLIMIT [VC1=1 VC2=0 VC3=0]

:

N1000 M30

Correct:

N10   G00 X0 Y0 Z0

N30   #SET AX LINK[1, B=X]

N40   #ENABLE AX LINK[1]

:

N90   #DISABLE AX LINK[1]

N100  #GET WCS POSLIMIT [VC1=1 VC2=0 VC3=0]

:

N1000 M30

Response

Class

2

Abort NC program processing.

Solution

Class

3

Check and modify NC program. Deselect the active synchronous operation with #DISABLE AX LINK or #AX LINK OFF (ALL) before the use of the command #GET WCS POSLIMIT.

Error type

1, Error message from NC program.