ID 60183

CAM/GEAR: the selected master axis is not configured as a master

Description

The master axis specified in the command of a camming / gearing movement (PLC modules MC_CamIn, MC_GearIn) is not configured as a master axis. The parameter P-AXIS-00288 must be assigned the value 1 to configure an axis as master axis.

Response

Class

5

Abort NC program / PLC block reports an error.

Solution

Class

7

Set parameter P-AXIS-00288 of the master axis specified in the command (parameter 2 of the error message) to 1.

Parameter

%1:

Logical axis number (P-AXIS-00016) of the spindle.

%2:

Logical axis number [-]

Axis number (P-AXIS-00016) of the master axis specified in the ordering.

Error type

-