ID 70376

Spindle speed monitoring: Maximum permissible speed exceeded.

Description

The actual spindle speed exceeds the parameterised maximum speed by at least 10%.

Spindle speed is automatically limited to the maximum speed set in the tool data so this error message should never occur.

Possible causes:

  • Incorrect configuration of velocity scaling either in the controller or in the drive.
  • Malfunction in the drive.
  • Insufficient parameter setting of speed or position control loop causing overshoot in the actual speed by more than 10%.

Response

Class

5

Stop axis.

Solution

Class

6

 

Parameter

%1:

Logical axis number [-]

Log. axis number (see P-AXIS-00016).

%2:

Current value [1µm/s or 0.001°/s]

Current actual axis speed.

%3:

Upper limit value [1µm/s or 0.001°/s]

Maximum permissible axis speed.

%4:

Current value [-]

Current actual axis speed in increments per cycle.

Error type

11, Error message from position controller.