ID 70394

Maximum admissible distance for homing exceeded.

Description

During homing, the axis has moved further than the permissible distance set in parameter P-AXIS-00412 from the start position of homing. This is an indication that the homing sequence is disturbed, e. g. the reference cam was not found.

Response

Class

7

Abort program, output error message.

Solution

Class

6

Remove reason for homing fault.

Parameter

%1:

Logical axis number [-]

 

%2:

Limit value [0.1 µm or 0.0001°]

Set value of P-AXIS-00412.

%3:

Error value [0.1 µm or 0.0001°]

Distance from start position of homing.

%4:

Current value [-]

Current command position.

%5:

Current value [0.1 µm or 0.0001°]

Modulo range of the axis.

Error type

1, Error message from NC program.