ID 110477

Position of interpolation point in leadscrew error compensation exceeds value range.

Description

The interpolation points in the compensation table of the equidistant leadscrew error compensation, the support positions of the correction value table are defined with the start point (see P -COMP-00019), the spacing between the interpolation points (see P-COMP-00020) and the number of entries (see P-COMP-00020). However, the final position of the correction compensation value table calculated from this information (P-COMP-00019 +P-COMP-00020 * P-COMP-00018) is greater than permissible.

Response

Class

3

The leadscrew error compensation is not activated.

Solution

Class

7

Compensation value table of the leadscrew error compensation.

Reduce the number of entries P-COMP-00020 in the compensation value table

Reduce the distance P-COMP-00018 between interpolation points

Parameter

%1:

Logical axis number [-]

%2:

Error value [increments]

%3:

Upper limit value [increments]

Error type

2, Error message by data transfer from parameter list into control device.