ID 150087

max_inkr_pro_takt is greater than maximum value.

Description

The manual mode parameters are read and interpreted by the CNC. The program detects that a value for the P-MANU-00007 parameters was specified in the manual mode parameters. This value exceeds the fixed limit for the maximum number of handwheel increments per CNC cycle fixed in the CNC system.

Response

Class

3

Manual mode parameters are not transferred to the CNC.

Solution

Class

6

Correction of the value for P-MANU-00007so that it is <= the limit value (see parameter 2 of the message).

Reinterpret manual mode parameters by restarting CNC System.

Parameter

%1:

Current value [-]

Maximum number of handwheel increments (P-MANU-00007) allowed by the handwheel per CNC cycle defined in the manual mode parameter set.

%2:

Limit value [-]

Maximum number of handwheel increments per CNC cycle taken into account by the CNC system.

%3:

Logical control element number [-]

Logical number of input device where the value of parameter P-MANU-00007 exceeds the value set in the CNC system.

Error type

2, Error message by data transfer from parameter list into control device.