Channel parameters
P-CHAN-00104 | Restore coupling after reset (synchronous operation) |
Description | An active axis coupling (synchronous operation) is deselected by NC reset. Set this parameter to 1 if the axis coupling is to be reactivated automatically in the following NC program. |
Parameter | synchro_data.restore_coupling_after_reset |
Data type | BOOLEAN |
Data range | 0/1 |
Dimension | ---- |
Default value | 0 |
Remarks | This parameter may only be used if all axes participating in the coupling exist in the basic configuration of the NC channel. |
P-CHAN-00105 | Restore coupling after program end (synchronous operation) |
Description | An active axis coupling (synchronous operation) is deselected at NC program end (#DISABLE AXLINK) if it is not ended explicitly in the NC program. Set this parameter to 1 if the axis coupling is to be reactivated automatically in the following NC program. |
Parameter | synchro_data.preserve_coupling_after_prog_end |
Data type | BOOLEAN |
Data range | 0/1 |
Dimension | ---- |
Default value | 0 |
Remarks | This parameter may only be used if all axes participating in the coupling exist in the basic configuration of the NC channel. |