Process (internal cycle)

The internal cycle process can be described as follows:

1. Pre-position in Z.
2. (Pre-position in X direction.)
3. Measure in X- direction.
4. Move back to starting point.
5. Then follow measurements in X+, Y- and Y
6. Move back to starting point in Z.
7. Position in Y on the 2nd drilled hole and repeat the measurement process.
8. Position in X on the 3rd drilled hole and repeat the measurement process.
9. Position in Y on the 4th drilled hole and repeat the measurement process.
10. Determine the central points of the 4 drilled holes
11. Description of selected zero offset.