General block search parameters
Block search type
Name | mc_cmd_bs_type_w | ||
Description | This object defines the block search type. Permissible values: 0 – no block search (default) 1 – file offset 3 – block counter 4 – block number | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x49 |
Data type | UN16 | Length/byte | 2 |
Attributes | read/ write | Unit | - |
Remarks |
| ||
Name | mc_cmd_bs_type_r | ||
Description | This object reads the block search type. Possible values: 0 – no block search (default) 1 – file offset 3 – block counter 4 – block number 5 - Program end | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x61 |
Data type | UN16 | Length/byte | 2 |
Attributes | read | Unit | - |
Remarks |
| ||
Automatic resumption
Name | mc_cmd_bs_auto_return_w | ||
Description | This object defines that resumption of motion on the contour occurs automatically. | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x4B |
Data type | BOOLEAN | Length/byte | 1 |
Attributes | read/ write | Unit | - |
Remarks |
| ||
Name | mc_cmd_bs_auto_return_r | ||
Description | This object reads whether resumption of motion on the contour should occur automatically. | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x4B |
Data type | BOOLEAN | Length/byte | 1 |
Attributes | read | Unit | - |
Remarks |
| ||
No stop on resumption
Name | mc_cmd_bs_no_hold_at_restart_w | ||
Description | This object defines whether resumption of motion on the contour should occur directly without any operator input. | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x79 |
Data type | BOOLEAN | Length/byte | 1 |
Attributes | read/ write | Unit | - |
Remarks |
| ||
Name | mc_cmd_bs_no_hold_at_restart_r | ||
Description | This object reads whether resumption of motion on the contour should occur directly without any operator input. | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x7A |
Data type | BOOLEAN | Length/byte | 1 |
Attributes | read | Unit | - |
Remarks |
| ||
Maximum path deviation
Name | mc_cmd_bs_deviation_max_w | ||
Description | This object defines the maximum deviation of the axes between actual position and continuation position when machining is resumed after block search. If resumption of motion on the contour is automatic, the maximum path deviation is not considered since the exact continuation position has already been reached. | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x4C |
Data type | UN32 | Length/byte | 4 |
Attributes | read/ write | Unit | [0.1 µm] |
Remarks |
| ||
Name | mc_cmd_bs_deviation_max_r | ||
Description | This object reads the maximum deviation of the axes between actual position and continuation position when machining is resumed after block search. If restart to the contour is automatic, the maximum path deviation is not considered since reaching the exact continuation position is ensured. | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x64 |
Data type | UN32 | Length/byte | 4 |
Attributes | read | Unit | [0.1 µm] |
Remarks |
| ||
Program start as of file offset
Name | mc_command_file_offset_w | ||
Description | The file offset defines a jump to a known position in the NC program. The program part before the jump point is not evaluated. Processing starts at the jump point as for a program shortened by file offset. This object defines the file offset. | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x11 |
Data type | SGN32 | Length/byte | 4 |
Attributes | write | Unit | - |
Remarks | Can also be used in combination with all block search types. | ||
Breakpoint
Name | mc_cmd_bs_breakpoint_position_w | ||
Description | This object defines an automatic breakpoint by specifying the distance from program start. | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x7B |
Data type | REAL64 | Length/byte | 8 |
Attributes | read/ write | Unit | [0.1 µm] |
Remarks | Can also be used in combination with all block search types. | ||
Name | mc_cmd_bs_breakpoint_position_r | ||
Description | This object reads an automatic breakpoint by specifying the distance from program start. | ||
Task | COM (Port 553) | ||
Index group | 0x12010<CID> | Index offset | 0x11 |
Data type | REAL64 | Length/byte | 8 |
Attributes | read | Unit | [0.1 µm] |
Remarks | Can also be used in combination with all block search types. | ||