ID 50917

Invalid parameter setting, r_max_equidist , p_admin->param.r_max_scale.

Description

When the ORBIT channel is activated, the parameters for the maximum scaling and equidistant radius are defined with the command
#TRACK CHAN ON [EXTEND="DR channel number" MAX_SCALE=<val> MAX_EQUID=<val>].

The error is output when the value for the maximum scaling radius is less than 0 or the value for the maximum equidistant radius is less than the maximum scaling radius.

Response

Class

4

Movement stop.

Solution

Class

7

Check and correct the programming of the values for MAX_SCALE and MAX_EQUID in #TRACK CHAN ON [EXTEND="DR channel number" MAX_SCALE=<val> MAX_EQUID=<val>] in the ORBIT channel.

Parameter

%1:

Current value [0.1 10^-3 mm or ø]

Value for MAX_EQUID in #TRACK CHAN ON [EXTEND="DR channel number" MAX_SCALE=<val> MAX_EQUID=<val>].

%2:

Current value [0.1 10^-3 mm or ø]

Value for MAX_SCALE in #TRACK CHAN ON [EXTEND="DR channel number" MAX_SCALE=<val> MAX_EQUID=<val>].

%3

Current value [0.1 10^-3 mm or ø]

Difference between MAX_EQUID and MAX_SCALE.

%4

Limit value [0.1 10^-3 mm or ø]

Limit for difference.

Error type

1, Error message from NC program.