Process (internal cycle)

Before cycle start, the reference tool must be positioned centrally above the tool touch probe.

After cycle start, the following process then results when default parameters are used:

1. Measurement takes place from the starting point in the Z direction and is then lifted to the starting position.
2. The reference tools is positioned next to the measuring plate at the positioning feed in the X+ direction.
3. Measure from this position in the direction of the plate centre.
4. This procedure is repeated for all four directions (X+,Y+,X-,Y-).
5. The tool retracts to the starting position in Z.
6. Measurement is repeated in the Z direction
7. The tool retracts to the starting position in Z.