ID 310019

Sensor is completely extended.

Description

The current offset of the distance control (see [FCT-M3]) was frozen.

With axis-specific distance control, the moved axis has reached the maximum deviation of the probe sensor.
(maximum deviation = P-AXIS-00420 + ½* P-AXIS-00421)

With 3D distance control, the TCP reaches the maximum deviation of the probe sensor.
(maximum deviation = P-CHAN-00807 + ½* P-CHAN-00808)

A possible cause could be a hole in the workpiece.

Response

Class

7

Controlled halt of the axis, the control loop is closed.

Solution

Class

6

Check the sensor and the workpiece

Parameter

%1:

Logical axis number [-] or Logical channel number [-]

Logical axis number Axis parameters of the axis affected for axis-specific distance control,
logical channel number Logical number of a NC channel (P-CHAN-00400) for 3D distance control.

%2:

Current value [0.1 10^-3 mm or ø]

Current position value of sensor

%3:

Lower limit value [0.1 10^-3 mm or ø]

Lower limit value for the sensor position

%4:

Block number [-]

Block number in the NC program

Error type

-