Bit number process data 'value latched probe 1' (P-AXIS-00678)

P-AXIS-00678

Bit number process data 'value latched probe 1'

Description

This parameter defines which bit of the process data set up in P-AXIS-00677 is used to transfer the information that the drive has latched a value with probe 1.

The last significant bit has number 0, the maximum value depends on the size of the process data used.

When the SERCOS status word is used for transmission of the 'value latched probe 1' bit, only bit numbers 6 and 7 can be used (real-time status bits 1 and 2).

Parameter

antr.sercos.probe_1_realtime_bits.value_latched.bit_nr

Data type

SGN16

Data range

-1 … MAX(SGN16)

Axis types

T, R, S

Dimension

T: ----

R,S: ----

Default value

-1

Drive types

SERCOS

Remarks

If the bit number configured here is invalid, the error message P-ERR-110609 and the axis parameters P-AXIS-00118 (measuring axis) and P-AXIS-00098 (kasto_axis) are reset to prevent the execution of a measurement run or edge banding with incompletely configured probes.