ID 20886

None of the programmed axes has axis mode C-axis.

Description

When face or lateral surface machining with the command #FACE or #CYL, the axes programmed in the command are not configured for C axis mode.

In this case, the cause may be an incorrectly configured axis type or an incorrect axis mode in the associated axis parameter lists.

Response

Class

2

Abort NC program processing.

Solution

Class

3

Check the configured axes in the command for their axis type P-AXIS-00018 and axis mode P-AXIS-00015 .

Note: A C axis must be configured as follows:

kenngr.achs_typ     0x0002 or 0x0004

kenngr.achs_mode    0x0204

Error type

1, Error message from NC program.