Maximum permissible output value (P-AXIS-00725)

P-AXIS-00725

Maximum permissible output value

Description

This parameter defines the maximum permissible output value. If the value specified in the configuration lists or in the NC program overshoots the set limit, it is automatically limited to the maximum value. No error message is then output.

If P-AXIS-00725 is configured, P-AXIS-00726 must be less than this parameter, otherwise the warning P-ERR-70385 is output and the values are swapped.

No value limit takes place by default.

Irrespective of this parameter setting, a value range check always takes place with the specified data type P-AXIS-00722. If an overflow is detected, the controller outputs the error message P-ERR-70384.

Parameter

antr.fixed_stop.drive_ident[i].max_limit

Data type

REAL64

Data range

Dependent on P-AXIS-00722 and P-AXIS-00724

Axis types

T, R

Dimension

T: ----

R: ----

Default value

1.000000e+199

Drive types

SERCOS, CANopen

Remarks

By default no limit is active; the limit is disabled at a value of 1.000000e+199.