Start-up parameters
P-STUP-00111 | File path for diagnosis upload |
Description | This parameter defines the file path for writing the diagnosis data upload file. |
Parameter | configuration.diagnosis_upload.path |
Data type | STRING |
Dimension | --- |
Default value | Standard CNC programme path, can be set via system manager -> CNC |
Remarks |
|
P-STUP-00112 | Filename for diagnosis upload |
Description | This parameter specifies the filename of the diagnosis data upload file. The file path is defined by P-STUP-00111 . |
Parameter | configuration.diagnosis_upload.default_file |
Data type | STRING |
Dimension | --- |
Default value | diag_data.txt |
Remarks |
|
P-STUP-00113 | Name of the upload file of the diagnosis data at start-up |
Description | This parameter specifies the name of the diagnosis data upload file at start-up. The file path is defined by P-STUP-00111 . |
Parameter | configuration.diagnosis_upload.startup_file |
Data type | STRING |
Dimension | --- |
Default value |
|
Remarks | Note: If P-STUP-00113 is unassigned, no diagnosis upload can be commanded at start-up. |
P-STUP-00114 | Number of diagnosis data output files to be saved |
Description | This parameter defines the number of diagnosis data output files to be saved. The file path is defined by P-STUP-00111 . |
Parameter | configuration.diagnosis_upload.history_nbr |
Data type | UNS16 |
Dimension | ---- |
Default value | 1 |
Remarks |
|
P-STUP-00115 | Identifier to specify the diagnosis upload |
Description | This parameter defines the identifiers to specify the diagnosis upload. For an overview of possible identifiers, see TOPICS table. |
Parameter | configuration.diagnosis_upload.topics |
Data type | STRING |
Dimension | ---- |
Default value | MAX |
Remarks |
|
P-STUP-00117 | Diagnosis upload mode |
Description | This parameter defines the mode for a diagnosis upload. For an overview of the possible settings, see the Mode Table |
Parameter | configuration.diagnosis_upload.mode |
Data type | STRING |
Dimension | --- |
Default value | STANDARD |
Remarks | Parameter available as of CNC Build V2.11.2059, V2.11.2830, V3.1.3079.43 or V3.1.3107.33. |
Diagnosis upload mode | Meaning |
STANDARD | Default upload with no further functions |
REGRESSION | Formatting for regression test |
PROTOCOL_INFO | Additional information about the upload procedure |
MSG_FLUSH_OFF | Deactivate automatic flush for messages to ISG_DIAG_BED at the start of the diagnosis upload. |