ID 150008

Offset limit reached in jog mode.

Description

The CNC is in manual operation mode state. Besides for the axis which should be moved

, the incremental jog mode is activated.

The axis reached the motion area restricted by the manual operation offset limits.

They are defined by:

• the parameters P-AXIS-00137, P-AXIS-00138 of the axis parameter data record
• or by programming #MANUAL LIMITS[...] or #SET OFFSET[...] in the NC program

For more information on manual mode offset limits:

[FCT-A4// Section: Description]

Response

Class

3

Solution

Class

6

Motion is only possible in the opposite direction.

Parameter

%1:

Logical axis number [-]

Number of logical axis, which exceeds manual mode offset limit.

%2:

Current value [increments]

Sum of all increments commanded by control elements during manual mode.

%3:

Limit value [increments]

Depending on the manual offset limit value exceeded: P-AXIS-00137 or P-AXIS-00138

Error type

-